Supercharger Snout Bearings Isolator Coupler Jaguar Jag Land Rover Range 5.0

Description

Eaton Nose Drive (snout) Bearings
Aftermarket Oil Filled Nylon Isolator (Coupler)
Direct replacement for the spring loaded noisy isolator in your
Land Rover Jaguar 5.0 Engine supercharger
Does not fit 3.0 liter engines
The flexible isolator is a direct replacements for the original spring isolator
Upgraded isolators are torsionally stiff for power transmission but are flexible to allow for minor
misalignment, absorb shock
and reduced side loads on bearings
Sized specifically for the Jaguar, Machined and Reamed
from oil filled nylon for long life!
We also stock Many Eaton Bearings, Eaton Couplers, Eaton Supercharger Oil, etc...
Snout Rebuild Video
See additional pictures of a supercharger snout
Installation Notes:
The snout is sealed to the supercharger with RTV (silicone), scrape off the old and apply some new sparingly. There is one bolt in the snout inlet on some superchargers, see 2nd picture. The TB gasket is reusable but a new one is C2Z28265. I recommend a bolt torque of 17 ft-lb for the snout bolts.